Commercial parking lot with curbed planting islands of young trees, shrubs and daylilies that plows must avoid
Lawn Improvement Articles

Before the First Storm: What to Mark on Your Commercial Property So Plows Don’t Damage It

You'll learn which features on a business property to mark before snow hides them, how to set the stakes, and what to agree on with your plow contractor so curbs, islands and planting beds make it to spring.

By Boston Landscape Co.8 min read

The short answer

  • Stake anything a plow blade can hit or bury: curb corners, island noses, hydrants, catch basins, speed bumps, wheel stops, light pole bases, lawn edges and planting beds.
  • Set tall, reflective snow stakes in late fall while the ground still takes them. Once the ground freezes, leave installation to a pro.
  • Walk the lot with your snow contractor to confirm every marker, choose pile areas away from drains, beds and exit sight lines, and photograph existing damage.
  • Check stakes after every storm, then do a spring walk-through so next year's marking plan reflects what actually got hit.

Why the marking has to happen before the snow does

At 4 a.m., after a few inches of snow, a parking lot looks like one flat white surface to a plow driver. The curb line, the rounded nose of a landscaped island, the drain grate in the low corner and the line where pavement meets lawn all disappear. The driver has two things to go on: memory, and whatever sticks up out of the snow.

Boston Landscape Co. is a local landscaping contractor serving Acton and the surrounding towns, and it handles both commercial landscaping and commercial snow removal. Office parks, retail plazas and multi-tenant buildings in places like Acton, Concord, Chelmsford and Burlington tend to share the same layout. They have curbed islands with shrubs and mulch, lawn strips along the drive lanes, and catch basins set in the low spots. Winter damage on these sites follows a familiar pattern:

  • Island corners get chipped or nudged out of line.
  • Lawn edges get peeled back in long strips along the drive aisles.
  • Mulch and gravel get pushed across walkways.
  • Drains get buried under banks that melt and refreeze across the lot.

Our heavy, wet coastal storms and repeated freeze-thaw cycles make every one of those problems worse as the season goes on.

Nearly all of that damage can be prevented by marking the property while you can still see it. Late fall is the window. If snow has already fallen at your property, don't skip the job. Use a clear, dry stretch to mark the hazards a plow is most likely to hit, and ask your contractor to set stakes anywhere the ground has already frozen.

The best time to mark a lot is while every curb and drain is still visible and the ground still takes a stake.

What to mark around your lot and landscaping

Walk the property slowly and picture how a blade would meet it: low, moving, and unable to see what's under the snow. These are the features that most often need a marker.

Curbs, islands and medians

  • Island noses and corners. The rounded ends of landscaped islands take the most hits because drivers cut them while turning.
  • Both ends of every curb run. Also mark any tight curves at entrances and drive-through lanes.
  • Medians and raised dividers that separate traffic lanes or parking rows.

Hydrants, drains and utilities

  • Fire hydrants on or next to your lot, so they stay findable and don't end up inside a pile. Hydrants along a public street usually belong to the town or water department, and local snow rules may cover them. Check with your fire department or town about what they expect around hydrants near your property.
  • Catch basins and trench drains. A buried drain leaves meltwater nowhere to go, which leads to ponding and refreezing.
  • Raised covers and cleanouts that sit even slightly above the pavement and can catch a blade.
  • Gas meters, backflow devices and irrigation heads near the edges of pavement and lawn.

Speed bumps and raised features

  • Speed bumps and humps, which can stop a plow hard or get torn up.
  • Wheel stops (parking blocks), which are easy to shove out of place.
  • Light pole bases, bollards, sign posts, low walls and steps.

Lawn edges, beds and walkways

  • Every spot where pavement meets turf, especially along drive lanes where a blade tends to drift.
  • Planting beds near traffic. This includes entrance beds with shrubs or perennials you want back in spring.
  • Walkways and accessible ramps beside the lot. These are usually cleared with smaller equipment, and those operators need clear edges too.

Things that can be moved

Planters, benches, bike racks and temporary signs are easier to move for the season than to protect. Anything that has to stay out on the pavement should get a marker of its own.

If you're unsure whether something needs a stake, picture the blade a few feet off course and ask what it would hit.

How to place snow stakes so they actually help

Most commercial properties use tall fiberglass snow stakes with reflective bands near the top. They flex when bumped instead of snapping, and they show up well in headlights. Choose stakes tall enough to stand above the banks you expect by late winter.

Placement tips

  • Put the stake at the edge of what you're protecting. Set it on the lawn or bed side of a curb so the driver stops before reaching the curb.
  • Mark every corner and curve. On long straight runs, space the stakes so a driver can read the line from one to the next. On tight curves, set them closer together.
  • Stake beside drains and hydrants, never in a grate or against the hydrant itself.
  • Use a simple color code if it helps. For example, one color could mean hard obstacles like curbs and hydrants, and another could mean soft edges like lawn and beds. There's no universal standard, so agree on the meaning with your contractor and write it down.
  • Keep sight lines open. Don't cluster stakes where they block a driver's view at an exit or crosswalk.

Doing it safely

If you or your staff set stakes yourselves, follow these precautions:

  • Work in daylight during the quietest hours.
  • Wear high-visibility vests and cone off the area you're working in.
  • Work in pairs so one person can watch traffic.
  • Only set stakes in soft soil or mulch.

Site lighting wiring and irrigation lines often run under islands and along lawn edges. If you don't know what's buried in a spot, don't push anything into it; ask a professional first. Leave any staking in frozen ground or through pavement to your contractor.

Never drive stakes where buried wiring or irrigation lines might run, and don't force them into frozen ground. Leave both situations to a pro.

Walk the site with your snow contractor

Stakes tell a driver where things are. A walk-through tells the crew what you want done around those things. Plan to spend some unhurried time on site with whoever manages your snow account, ideally before the first storm. Bring a printed site plan or an aerial photo you can draw on.

What to cover on the walk

  1. Confirm every marker, and add any the contractor flags from experience.
  2. Choose snow storage areas. Good pile spots sit away from drains, planting beds, building doors and the sight lines at exits. Avoid places where meltwater will run across walkways and refreeze overnight.
  3. Name the no-pile zones. These include the tops of drains, the space in front of hydrants, shrub beds, the base of fences and walls, and accessible parking spaces.
  4. Set priorities such as main entrances, fire lanes, accessible spaces, loading docks and the routes tenants or customers use first.
  5. Photograph existing damage, like chipped curbs or a sunken island edge. Date the photos so there's no question about it in spring.
  6. Talk about obstacles such as cars left overnight, dumpster pickups and deliveries that might block plowing.

Your stakes and storage plan also shape how the lot gets plowed. Our guide to plowing a parking lot covers push direction and lane order, which is a separate question from what to mark beforehand.

Put everything on the site plan and give your contractor a copy. If you're still lining up coverage, our commercial snow removal page explains the service. You can also reach us through our estimate request page to talk through your property.

A marked-up site map that both you and the plow crew keep will be the most useful document you have all winter.

Protecting the planting beds and lawn themselves

Stakes keep the blade off your landscaping, but snow piles and salt can still do harm. A few extra steps in late fall make a real difference for the beds and turf around a commercial lot.

  • Keep piles off shrub beds and tree root zones. Heavy, compacted snow breaks branches and crushes perennials. Banks pushed against trunks can also damage bark.
  • Tie up multi-stem evergreens near drive lanes and entrances. Use soft twine so the weight of wet snow doesn't split them open.
  • Consider a temporary barrier for exposed shrubs. Snow fencing or burlap screens help shrubs that sit at the edge of a pile area or beside a heavily salted walkway.
  • Watch where salty meltwater flows. If it drains into the same bed every time it thaws, note it on your site plan. Our guide to protecting plants from road salt goes deeper on this.

If a bed or lawn edge gets hit every winter no matter what, treat that as a design problem that stakes alone won't solve. Pulling an island bed back from a tight turn, widening a turning radius, or using tougher plants at the edges can often solve the problem.

Snow piled on a shrub bed does its damage slowly, so settle pile locations before the first storm rather than after the first broken branch.

Keep the markers working through winter and into spring

Marking isn't a one-time job. Stakes get bent, buried and knocked over as the season goes on, and a missing stake in late winter is as risky as never having one.

During the season

  • Look over the lot after each storm once it's cleared, and replace or straighten any stakes that were hit. A bent stake also tells you the driver came close to that spot.
  • Watch pile heights. As banks grow, early-season stakes near storage areas can vanish. Taller markers or a flag on top keep them visible.
  • Update the site map when things change, such as a new tenant, construction fencing or a relocated dumpster.

In spring

Pull the stakes before spring cleanup and mowing begin so they don't get caught in equipment. Then walk the property with your dated fall photos and compare. Note any new curb damage, scraped turf along edges, shifted wheel stops and plants that came through badly. Lawn strips torn up along pavement are common after a hard winter. They're usually easier to repair early in the growing season than to leave until summer.

Finally, keep a short list of the spots that took hits even though they were marked. That list becomes next year's plan. A corner might need more stakes, a pile area might need to move, or an island edge might need a design change. Each winter should bring fewer surprises.

Save your fall photos and spring notes together. They're the starting point for next year's pre-season walk.

Common questions

Is it too late to mark my lot if it has already snowed?

No. Use a thaw or a dry stretch to mark the most likely hazards first: island noses, curb corners, hydrants and drains. If the ground has frozen, ask your snow contractor about setting stakes rather than forcing them in yourself.

Who is responsible for putting in snow stakes, the property owner or the plow contractor?

It depends on your agreement. Some contractors set stakes as part of their pre-season work, while others expect the owner or property manager to handle it. Whichever way you go, put it in writing so nothing gets missed.

Can I just paint curbs and islands instead of using stakes?

Paint helps with visibility before snow falls, but it disappears as soon as the curb is covered. Stakes stand above the snow, which is what a driver actually needs. Many properties use both.

Should snow ever be piled on landscaped islands?

Planted islands with shrubs or perennials are usually poor pile spots because the weight and salt can damage them. A plain turf island is sometimes used for storage if it drains well and doesn't block sight lines. Decide this on your site walk and mark it on the map.

What color snow stakes should I use?

There's no single required color. Bright, reflective stakes that stand out against snow work best. If different colors mean different things, agree on the code with your contractor and note it on the site plan.

Boston Landscape Co.Serving Massachusetts towns

← Back to all posts

Talk through winter plans for your lot

Reach out to Boston Landscape Co. to discuss commercial snow removal for your business property.